Showing posts with label boot. Show all posts
Showing posts with label boot. Show all posts
Saturday, October 29, 2016
Samsung S5570 Galaxy s5570 Successfully Boot Repair Done
Samsung S5570 Galaxy s5570 Successfully Boot Repair Done
how to Samsung galaxy s s5570
Dead boot Repair done with test result Here
Dead boot Repair done with test result Here
Go to link download
Tuesday, October 25, 2016
Easy Repair boot samsung s4 i9500 via sd card
Easy Repair boot samsung s4 i9500 via sd card
Hello Friends, Welcome to GSMFirmware.in Here you will get the Easy Repair boot samsung s4 i9500 via sd card Download of Latest file version 2016. We are ready here to provide your desire Android files free Download.
Hot!! Hot!! Easy Repair boot samsung s4 i9500 via sd card!!!
EASY REPAIR BOOT FREE SAMSUNG S4 I9500 VIA SD CARD, 100% TESTED!!
EASY REPAIR BOOT FREE SAMSUNG S4 I9500 VIA SD CARD, 100% TESTED!!
DISABLE SAMSUNG VIA JTAG WORK ON THESE DEVICES WITH A STRONG
PROTECTION AND THAT BY THE TIME IS NEEDED TO BREAK THE SAME TIME.
NEEDED:
1.- Samsung Galaxy S4 GT-i9500 BRICKED O DEAD
2.- MICRO SD CARD 2GB (NOT HC)
3.- JIG O CABLE JIG NEEDED:
1.- Samsung Galaxy S4 GT-i9500 BRICKED O DEAD
2.- MICRO SD CARD 2GB (NOT HC)
4.- USB CABLE
5.- ODIN3 v3.07
6.- FILE REPAIR BOOT S4 I9500 gt-i9500_boot_recovery - Download - 4shared
Boot Recovery process for GT-I9500:
1.- Copying bootloader file to external SD Card, using normal GT-I9500.
2.- Inserting the SD card to ‘No Power’ phone, and copy the bootloader file to the defective PBA.
3.- After downloading bootloader file to the defective phone, enter the download mode with the phone, and download Full S/W.(PIT, PDA, CSC, PHONE files)
4.- Repair Code for Boot Recovery MUST be entered as ‘C3’ on Warranty System (For Europe)
START:
1.- Insert External SD Card to normal phone to copy Bootloader to SD card.
2.- Run Odin3 v3.07.exe
3.- Click ‘Bootloader’ button and load Bootloader file
4.- Enter download mode with the normal phone (SD Card inserted).
? Download Mode : Volume Down key + Home key + Power Key and press Volume Up key
5.- Connect the phone to PC, using USB cable
6.- Click Start button to copy bootloader to the phone
7.- Disconnect the phone from PC
8.- Close the Odin3 v3.07.exe and Run it again
9.- Click ‘Bootloader’ button and load Bootloader file, and check ‘T Flash’ option in the Odin, to copy bootloader to SD Card. After connecting the phone to PC, click Start button to download bootloader to SD card
10.- After downloading, turn off the phone and remove the SD Card
? This SD card will be used to recover boot of the phone.
11.- Disassemble the ‘No Power’ phone. Then insert SD card to the PBA
12.- Connect the PBA with Anyway JIG and power supply, with the POWER OFF.
? Use 11pin cable to supply power to the PBA
13.- Short the ‘TP_NAND_CMD’ to R5103
(HQ uses tweezers to short the resistance)
14.- Turn on the PBA and STOP THE SHORT (remove tweezers) after 3 to 6 seconds from turning on the PBA.
15.- After approximately 5 seconds, you can see message on the LCD boot recovery was succeeded.
16.- Press Volume Down Key to make the phone enter download mode
17.- Download Full S/W including PIT, PDA, CSC and PHONE
If you want to require knowing more about Easy Repair boot samsung s4 i9500 via sd card file Resource or updates. Please ask to us via our contact us form or comment box. Please make sure that, you don’t send Personal information via the Comment box. Thank you for being with us.
Go to link download
Saturday, October 8, 2016
Samsung Galaxy Y S5360 No Download Mode After Write Boot
Samsung Galaxy Y S5360 No Download Mode After Write Boot
[Solution] Samsung Galaxy Y S5360 No Download Mode After Write Boot
hi,
this is the TESTED solution for s5360 no download mode
*sold pinout
*select s5360
*set size Auto Fullflash
*download this dump
*select your dwnloaded dump
*tick WRITE and wait 21 sec.
*HOLD VOL. DOWN+HOME+POWER ON
*phone in DOWNLOAD MODE
*[optionally] if phone no downlad mode, FULL ERASE and repeat the procedure
*[optionally] if phone alive w/ download mode but IMEI is 000000, then repair in other samsung sof/box/dongle
*[optionally] if you follow the instruction above and phone is still dead, check your PHONE HARDWARE
screenshot:
download link:
GPGjtag_Samsung S5360_BCMBOOT-SBL1-SBL2-PIT-SYSPARM-UPCH_Sniper_04 - Download - 4shared - Mhannie Jay-Ar Monterey
Go to link download
Wednesday, September 21, 2016
Samsung I9300 direct emmc boot repair issue Solved How To Guide 100 Tested
Samsung I9300 direct emmc boot repair issue Solved How To Guide 100 Tested
Today i have come one Samsung i9300 which is automatically dead
i will try to repair boot with Mmc method not work than i will try TP mmc method its also not work
After that try with direct emmc method connection OK
But just hang on any Oparaction not erased not write etc ...
Here is the error log
Download this:
i9300_atf_emmc.rar
i will try to repair boot with Mmc method not work than i will try TP mmc method its also not work
After that try with direct emmc method connection OK
But just hang on any Oparaction not erased not write etc ...
Here is the error log
Download this:
i9300_atf_emmc.rar
Code:
======================================================
======================================================
eMMC Test Point Connection Module
======================================================
==========================================Code:============
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
1.45-1.50V
CID : 15010056545530304DF159A77732
CSD : D02701320F5903FFF6DBFFFF8E40406D
eMMC Boot Information
Revision 1.6 (for MMC v4.5)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 2048 KB
RPMB PARTITION SIZE: 128 KB
eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : VTU00M
Product Rev : 15.1
Product SN : 59A77732
Manufactured : January 2012
Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRANS_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO
Extended CSD Saved:
15010056545530304DF159A77732_932DD6C7.ext_csd
Backup Directory:
G:All Software BoxA T FAdvanceBox Turbo FlashereMMCEXT_CSD
Task Selected: Normal Factory Erase
======================================================
For eMMC Revision 1.2 (for MMC v4.2) and LOWER
--> This will ERASE USER AREA, BOOT1, BOOT2, and RPMB
For eMMC Revision 1.3 (for MMC v4.3) and HIGHER
--> This will ONLY ERASE USER AREA
======================================================
This eMMC is: Revision 1.6 (for MMC v4.5)
Factory Erasing Supported FLASH AREA...
here is my connection pic
Atf team supporters Pls kindly tell me Where Im doing wrong
Atf team supporters Pls kindly tell me Where Im doing wrong
Go to link download
Subscribe to:
Posts (Atom)